NAME IO::FD - Faster accept, socket, listen with file descriptors, not handles SYNOPSIS Create and bind a STREAM socket (server): use IO::FD; use Socket ":all"; die "Error creating socket" unless IO::FD::socket(my $listen_fd, AF_INET, SOCK_STREAM, 0); my ($err, @sockaddr)=addrinfo "0.0.0.0", 80, { family=> AF_INET, socktype=> SOCK_STREAM, flags=> AI_NUMERICHOST|AI_PASSIVE }; die "Error binding" unless FD::IO::bind($listen_fd, $sockaddr[0]{addr}); die "Error accepting" unless IO::FD::accept(my $client_fd, $listen_fd); #read and write here Create and connect a STREAM socket(client): use IO::FD; use Socket ":all"; die "Error creating socket" unless IO::FD::socket(my $fd, AF_INET,SOCK_STREAM,0); my ($err,@sockaddr)=addrinfo "127.0.0.1", 80, { family=> AF_INET, socktype=> SOCK_STREAM, flags=> AI_NUMERICHOST }; die "Error connecting"; unless FD::IO::connect($fd, $sockaddr[0]{addr}); #read and write here Open a file use IO::FD; use Fcntl; die "could not open file" unless IO::FD::sysopen(my $fd, "path.txt", O_RDONLY); Read/Write/Close an fd use IO::FD; my $fd; #From IO::FD::socket, IO::FD::accept IO::FD::sysopen, POSIX::open die "Error writing" unless IO::FD::syswrite $fd, "This is some data"; #Length and optional offset die "Error reading" unless IO::FD::sysread $fd, my $buffer, $length); die "Error closing" unless IO::FD::close $fd; Advanced: fctrl... #TODO: ioctl... DESCRIPTION IO::FD is an XS module which implements common core Perl system I/O functions to use file descriptors instead of Perl file handles. Functions include but are not limited to "accept", "connect", "socket", "bind", "sysopen", "sysread", and "syswrite". It also implements some non core functions which normally would use file handles such as "dup" and "mkstemp". This module can significantly lower memory usage per file descriptor and decrease file/socket opening and socket accepting times. "accept" performance is particularly improved with much higher connection handling rates for a given backlog. Actual byte throughput (read/write) is basically unchanged compared to the core Perl sysread/syswrite. Please see the PERFORMANCE section later in this document The supported interfaces mostly resemble the core Perl implementations of similarly named functions. For example: #Perl: sysopen(my $file_handle, ...); sysread($file_handle, ...); #IO::FD IO::FD::sysopen(my $file_descriptor, ...); IO::FD::sysread($file_descriptor, ...); This modules IS NOT intended to be a drop in replacement for core IO subroutines in existing code. If you want a 'drop in replacement' please look at IO::FD::DWIM which is part of the same distribution. Currently this module is focused on Unix/Linux systems, as this is the natural habitat of a file descriptor. WHERE SHOULD I USE THIS MODULE? Networking ... Oh Yes Socket centric programs will benefit greatly from this module. The process of socket creation/opening/accepting/listening, where it is INET/INET6 or UNIX families is much improved. Slurp entire file ... Yes If a file can be loaded completely into memory for processing, this module will provide improved opening and closing times. Any decoding and line processing will need to be done manually Line Processing ... Hmmm, No General text file line processing is best left to Perl file handles. File handles do the heavy lifting of line splitting, EOL handling, encodings, which this modules does not implement. You can do it, but it is not in the scope of this module. LIMITATIONS Perl does a lot of nice things when working with files and handles. When using file descriptors directly you will loose: Buffering for file small read/write performance (via print and ) Automatic close when out of scope Close on exec Special variables not supported (ie '_' in stat) 'readline' support IO::Handle inheritance MOTIVATION Perl makes working with text files easy, thanks to file handles. Line splitting, UTF-8, EOL processing etc. are awesome and make your life easier. However, the benefits of file handles in a network context or binary files are not so clear cut. All the nice line ending and encoding support doesn't help in these scenarios. In addition, the OS kernel does a lot of buffering for networking already. Do we really need to add more? So if these features are not being fully utilised for binary/network programming, the hypothesis is that opening and accepting operations would be faster with file descriptors as less setup is required internally. APIs Each of the APIs mimic the Perl counterpart (if applicable) as much as possible. Unless explicitly mentioned, they should operate like built in routines. Consult perldoc -f FUNCTION for details. As none of these functions are exported, they must be called with full package name. Socket Manipulation IO::FD::socket IO::FD::socketpair IO::FD::bind IO::FD::listen IO::FD::accept IO::FD::accept_multiple my @new_fds; my @peers; my $count=accept_multiple(@new_fds, @peers, $listen_sock); Note: DO NOT use this function on a blocking socket. Accepts as many new connection sockets as available. The new sockets are stored in "new_fds", which is an array, not a array ref. The corresponding peers to the connections are stored in @peers, also an array not a reference. $listen_sock is the file descriptor from which the sockets are accepted from. It MUST be configured for non blocking operation, otherwise your program will just loop forever in this function Because this function will only works for non blocking listening sockets, the sockets/fds returned are forced into non blocking mode also. Than means on linux an explicit fcntl is called. On BSD type systems the socket will already be non blocking Returns the number of sockets accepted until an error condition occurred. Returns "undef" if no sockets where accepted. Check the $! for normal non blocking error codes. IO::FD::connect IO::FD::getsockopt IO::FD::setsockopt Note: Implements the integer shorthand as per perldoc -f setsockopt IO::FD::getpeername IO::FD::getsockname File Maniupulation IO::FD::sysopen IO::FD::sysopen4 Same as "IO::FD::sysopen", but expects all four arguments IO::FD::mktemp Behaves similar to File::Temp::mktemp Requires at least six 'X' characters at the end of the template NOTE: This function does not return a file descriptor. It might be included in future versions of this module IO::FD::mkstemp Behaves like File::Temp::mkstemp Requires at least six 'X' characters at the end of the template NOTE: Currently returns "undef" as path in list context. Cross platform fd paths are hard to extract. TODO: Fix this across platforms. IO::FD::sysseek Pipes IO::FD::pipe IO::FD::syspipe A alias of "IO::FD::pipe". Common IO::FD::dup IO::FD::dup2 IO::FD::close IO::FD::recv IO::FD::send IO::FD::sysread NOTE: Versions prior to 0.1.4 would end up using fd = 0 (normally STDIN) when it was non numeric. This is fixed in 0.1.4. An fd which is not numeric will cause an immediate return of undefined. IO::FD::sysread3 Same as "IO::FD::sysread", but expects only 3 of 4 arguments IO::FD::sysread4 Same as "IO::FD::sysread", but expects all four arguments IO::FD::syswrite NOTE: Versions prior to 0.1.4 would end up using fd = 0 (normally STDIN) when it was non numeric. This is fixed in 0.1.4. An fd which is not numeric will cause an immediate return of undefined. IO::FD::syswrite2 Same as "IO::FD::syswrite", but expect 2 of 4 arguments. IO::FD::syswrite3 Same as "IO::FD::syswrite", but expect 3 of 4 arguments. IO::FD::syswrite4 Same as "IO::FD::syswrite", but expect 4 of 4 arguments. IO::FD::fcntl IO::FD::sysfcntl Alias to "IO::FD::fcntl" IO::FD::stat Likely differences to Perl stat for larger integer values. TODO: fix this! IO::FD::lstat Likely differences to Perl lstat for larger integer values TODO: fix this! Experimental These functions haven't really been tested, documented or finished. They exist none the less. You will need to Look at the code for documentation at the moment. Their behaviour and interface are LIKELY TO CHANGE without notice. IO::FD::ioctl Not complete IO::FD::sysioctl Alias to ioctl IO::FD::clock_gettime_monotonic IO::FD::select Broken. Probably will be removed as core perl has this already. IO::FD::poll Constants for use with poll are available via "IO::FD:Constants" IO::FD::kqueue IO::FD::kevent This is broken ok 32 bit BSD at the moment. Constants for use with kevent are available via "IO::FD:Constants" IO::FD::pack_kevent IO::FD::sv_to_pointer IO::FD::pointer_to_sv IO::FD::SV IO::FD::SV($size) Allocates a string SV with the given size preallocated. The current string length is set to 0. For short string this is not the fastest way to allocate. For 4k and above, it is much faster, and doesn't use extra memory in compilation IO::FD::readline #SLURP A FILE local $/=undef; my $slurp=IO::FD::readline; #or #SLURP ALL RECORDS OF KNOWN LENGTH local $/=\1234; my @records=IO::FD::readline; A read line function is available, but is only operates in file slurp or record slurp mode (see perldoc -f readline). As no buffering is used, It does not attempt to split lines or read a line at a time like the normal Perl readline or <> operator PERFORMANCE Part of this distribution are benchmarking scripts. The following are typical outputs from my Intel 2020 Macbook Pro. Listen Backlog Results from benchmark/server-perl.pl benchmark/server.pl and benchmark/client.pl Listen Backlog: 10 Perl server: Connections before client refused: 18 IO::FD server Connections before client refuse: 9285 Listen Backlog: 100 Perl server: Connections before client refused: 190 IO::FD server Connections before client refuse: (none refused) Listen Backlog: 1000 Perl server: Connections before client refused: 245 IO::FD server Connections before client refuse: (none refused) Accept Results from benchmark/server-perl.pl benchmark/server.pl and benchmark/client.pl Listen Backlog: 100 Perl accept rate: 73568.4857256754/s IO::FD Accept rate: 150984.798776367/s Memory Usage Results from benchmark/file-memory.pl Creating 2000 file handles/descriptors Start maxrss (kB): 4500 Perl file handles Bytes: 905216, per handle: 452.608 IO::FD Bytes: 4096, per fd: 2.048 End maxrss (kB): 5692 Socket creation Results from benchmark/socket-create.pl Rate perl_socket_INET iofd_socket_INET perl_socket_INET 81919/s -- -56% iofd_socket_INET 185679/s 127% -- Rate perl_socket_INET6 iofd_socket_INET6 perl_socket_INET6 81498/s -- -57% iofd_socket_INET6 189253/s 132% -- Rate perl_socket_UNIX iofd_socket_UNIX perl_socket_UNIX 113778/s -- -78% iofd_socket_UNIX 508970/s 347% -- File open and close Results from benchmark/file-open-close.pl Rate file_handle file_desc_posix io_fd file_handle 91897/s -- -35% -37% file_desc_posix 140549/s 53% -- -4% io_fd 146161/s 59% 4% -- Read Performance Result from benchmark/file-read-write.pl Read performance: Read (bytes): 1024 x 2^0 Rate file_desc_posix file_handle io_fd file_desc_posix 1803743/s -- -5% -5% file_handle 1889325/s 5% -- -0% io_fd 1890461/s 5% 0% -- Read (bytes): 1024 x 2^1 Rate file_desc_posix io_fd file_handle file_desc_posix 1799026/s -- -1% -2% io_fd 1823610/s 1% -- -1% file_handle 1837458/s 2% 1% -- Read (bytes): 1024 x 2^2 Rate file_desc_posix io_fd file_handle file_desc_posix 1731140/s -- -1% -1% io_fd 1747626/s 1% -- -0% file_handle 1747627/s 1% 0% -- Read (bytes): 1024 x 2^3 Rate io_fd file_desc_posix file_handle io_fd 1458670/s -- -1% -3% file_desc_posix 1470359/s 1% -- -2% file_handle 1499189/s 3% 2% -- Read (bytes): 1024 x 2^4 Rate file_desc_posix file_handle io_fd file_desc_posix 1146879/s -- -3% -6% file_handle 1180322/s 3% -- -3% io_fd 1214700/s 6% 3% -- Write Performance Result from benchmark/file-read-write.pl Write performance: Write (bytes): 1024 x 2^0 Rate file_desc_posix io_fd file_handle file_desc_posix 1978800/s -- -7% -12% io_fd 2117316/s 7% -- -6% file_handle 2244774/s 13% 6% -- Write (bytes): 1024 x 2^1 Rate file_desc_posix io_fd file_handle file_desc_posix 2007408/s -- -6% -9% io_fd 2143700/s 7% -- -3% file_handle 2205537/s 10% 3% -- Write (bytes): 1024 x 2^2 Rate file_desc_posix io_fd file_handle file_desc_posix 1978800/s -- -7% -12% io_fd 2123851/s 7% -- -5% file_handle 2244774/s 13% 6% -- Write (bytes): 1024 x 2^3 Rate file_desc_posix io_fd file_handle file_desc_posix 1960478/s -- -7% -9% io_fd 2117316/s 8% -- -2% file_handle 2163924/s 10% 2% -- Write (bytes): 1024 x 2^4 Rate file_desc_posix io_fd file_handle file_desc_posix 1997468/s -- -5% -8% io_fd 2104367/s 5% -- -3% file_handle 2163924/s 8% 3% -- SEE ALSO The POSIX module provides an "open", "close", "read" and "write" routines which return/work with file descriptors. If you are only concerned with working with files, this is a better option as it is a core module, and will give you the purported benefits of this module. However it does not provide any networking/socket support. FUTURE WORK (IDEAS/TODO) Add more tests for stat and DWIM module Wider compatability for older perls Add More system functions which work with fds Work with win32 sockets Look into making a listen/accept fh/fd hybrid Maybe make an IO::Handle sub class AUTHOR Ruben Westerberg, REPOSITORTY and BUGS Please report any bugs via git hub: COPYRIGHT AND LICENSE Copyright (C) 2022 by Ruben Westerberg This library is free software; you can redistribute it and/or modify it under the same terms as Perl or the MIT license. DISCLAIMER OF WARRANTIES THIS PACKAGE IS PROVIDED "AS IS" AND WITHOUT ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.