Apache Compile HOWTO

Luc de Louw

           
        

Revision History
Revision 1.9.182003-02-09
Added XML and Sablotron support to PHP, dropped support for mod_jserv, added mod_jk support, enhanced support for Tomcat, updated software mentioned in the HOWTO, minor SGML enhancements
Revision 1.9.172002-10-16
Updated software mentioned in the HOWTO, Further SGML enhancements and cleanups like more metadata, callouts and others.
Revision 1.9.162002-07-04
Updated the software mentioned in the HOWTO, added LogFormat config for mod_gzip. Added gdbm to prerequisites. Lot of SGML enhancements like more metadata, and a revised FAQ section.
Revision 1.9.152002-06-19
Updated to mod_ssl-2.8.9-1.3.26 and removed the temporary patch.
Revision 1.9.142002-06-19
Updated to Apache 1.3.26 to fix security-hole CERT CA-2002-17 it is strongly recommended that users should update immediately, Added (temporary) patch to get mod_ssl 2.8.8 working with 1.3.26, Added --without-debug to MySQL configure
Revision 1.9.132002-06-15
updates of software mentioned in the HOWTO, added how to bind MySQL to a specific IP, some minor changes and corrections
Revision 1.9.122002-04-22
Added mod_gzip and mod_gunzip, Corrected some typos, updates of software mentioned in the HOWTO, separated the additional modules into an own section.
Revision 1.9.112002-04-07
Corrected lots of typos (non-technical), updates of software mentioned in the HOWTO
Revision 1.9.11-pre12002-03-15
Corrected some grammar, updates of software mentioned in the HOWTO
Revision 1.9.102002-03-09
Corrected some grammar, updates of software mentioned in the HOWTO
Revision 1.9.92002-02-11
Fixed a major bug in openssl config, restructured the document, added sources for further informations
Revision 1.9.82002-02-08
Updates of software mentioned in the HOWTO, and fixed some bugs
Revision 1.9.72001-12-26
Updates of software mentioned in the HOWTO, tested the HOWTO procedures on Linux running on IBM S/390 (zSeries) Machines (See "platforms" for more info), Added some basic support for Tomcat (Binaries only)
Revision 1.9.62001-10-27
Updates of software mentioned in the HOWTO, and fixed some bugs
Revision 1.9.52001-08-27
Yet another rewrite in DocBook 3.1
Revision 1.9.42001-08-26
Updated the Software-Versions mentioned in the document, corrected some typos
Revision 1.9.32001-06-23
Current Version 2.0.0-pre3 in Linux DocBook format
Revision 1.0.02000-08-05
First publication of the html-based document

This document describes howto compile the Apache Webserver with the most important modules like mod_perl, mod_dav, mod_auth_ldap, mod_dynvhost, mod_roaming, mod_jserv, and mod_php


Table of Contents
1. Introduction
1.1. Contributors and Contacts
1.2. Why I wrote this document
1.3. What this document is supposed to be
1.4. What this document doesn't do for you
1.5. Platforms
1.6. Copyright Information
1.7. Disclaimer
1.8. New Versions
1.9. Credits
1.10. Feedback
1.11. Translations
1.12. About the author
2. Prerequisites
2.1. General
2.2. OpenSSL
2.3. GNU Database System
2.4. MySQL
2.5. Building mm
3. Getting, build and install Apache with its basic modules
3.1. Get and untar the Apache Source
3.2. mod_ssl
3.3. mod_perl
3.4. Configure and build Apache
4. Additional modules
4.1. mod_dav
4.2. auth_ldap
4.3. mod_auth_mysql
4.4. mod_dynvhost
4.5. mod_roaming
5. Compressed delivery
5.1. mod_gzip
5.2. mod_gunzip
6. mod_php and its prerequisites
6.1. What is mod_php
6.2. Prerequisites
6.3. Building and installing PHP4
7. PHP extensions
7.1. APC (Alternative PHP-cache)
7.2. Zend-Optimizer (Do _NOT_ combine with APC-Cache!)
8. Jakarta Tomcat
8.1. What is Tomcat
8.2. Prerequisites
8.3. Download the binaries
8.4. mod_jk
9. Further Information
9.1. News groups
9.2. Mailing Lists
9.3. HOWTO
9.4. Local Resources
9.5. Web Sites
10. Questions and Answers

WarningSecurity hole in Apache older than 1.3.26
 

Do NOT use any Apache version older than 1.3.26. See http://www.cert.org/advisories/CA-2002-17.html for more information


1. Introduction

1.1. Contributors and Contacts

First I would thank all those people who send questions and suggestions that made a further development of this document possible. It shows me, sharing knowledge is the right way. I would encourage you to send me more suggestion, just write me an email .


1.2. Why I wrote this document

All Linux distributions I tested had a non-optimal default setup of Apache. Additionally all major distributions don't have current versions of Apache.

Finally most commercial Unix are delivered without pre-installed Apache, or using a very strange setup.

Since I am installing a lot of customized webservers on different Unixes therefor I wrote a plaintext document and placed it on my website so I can access it at work. Later a friend posted the URL to a mailinglist, and the first questions arrived. So I decided to put more information on the page.

After a lot of people requested the document as an »official« HOWTO written in SGML, I decided to prepare it to be one.


1.3. What this document is supposed to be

Compiling all the items described below needs a lot of configure-options that nobody can memorize. This is supposed to be a copy-paste-ready text to compile Apache and friends.

Also, people should learn how to build a full-featured Apache webserver by themself to be independent from any Linux distributors.


1.4. What this document doesn't do for you

It is just a Document, not a script that makes the work for you. You have to do all the steps by yourself.


1.5. Platforms

The original document was for all major Unix platforms. Now the HOWTOs are separated for each platform. You will find the same document adapted for:

  • Linux (This Document)

  • IBM AIX 4.3 and 5.1L

  • Sun Solaris 6/7/8

  • Hewlett-Packard HP-UX 11

  • {Free|Net|Open}-BSD

Important Notice for users running Linux on IBM S/390 (zSeries): PostgreSQL and Jserv wont compile on that system. All other programs and modules mentioned in the HOWTO are working perfectly

Other Unix platforms: Feel free to create a guest-account for me on your Unix platform, so I can have a look at the differences.

Windows-Users: I'm sorry, I'm too young for a heart-attack, You will need to upgrade your machine to a »real« operating system ;-)


1.6. Copyright Information

This document is copyrighted (c) 2000, 2001, 2002, 2003 Luc de Louw and is distributed under the terms of the Linux Documentation Project (LDP) license, stated below.

Unless otherwise stated, Linux HOWTO documents are copyrighted by their respective authors. Linux HOWTO documents may be reproduced and distributed in whole or in part, in any medium physical or electronic, as long as this copyright notice is retained on all copies. Commercial redistribution is allowed and encouraged; however, the author would like to be notified of any such distributions.

All translations, derivative works, or aggregate works incorporating any Linux HOWTO documents must be covered under this copyright notice. That is, you may not produce a derivative work from a HOWTO and impose additional restrictions on its distribution. Exceptions to these rules may be granted under certain conditions; please contact the Linux HOWTO coordinator at the address given below.

In short, we wish to promote dissemination of this information through as many channels as possible. However, we do wish to retain copyright on the HOWTO documents, and would like to be notified of any plans to redistribute the HOWTOs.

If you have any questions, please contact


1.7. Disclaimer

No liability for the contents of this documents can be accepted. Use the concepts, examples and other content at your own risk. As this is a new edition of this document, there may be errors and inaccuracies, that may of course be damaging to your system. Proceed with caution, and although this is highly unlikely, the author(s) do not take any responsibility for that.

All copyrights are held by their by their respective owners, unless specifically noted otherwise. Use of a term in this document should not be regarded as affecting the validity of any trademark or service mark.

Naming of particular products or brands should not be seen as endorsements.

You are strongly recommended to take a backup of your system before major installation and backups at regular intervals.


1.8. New Versions

This is the 15th Revision

New revisions of this document will be announced at http://freshmeat.net/projects/apache-compile-howto/?topic_id=905

The latest version of this document is to be found at http://www.delouw.ch/linux


1.9. Credits

I would thank all the nice people at for supporting me in writing HOWTOs


1.10. Feedback

Feedback is most certainly welcome for this document. Without your submissions and input, this document wouldn't exist. Please send your additions, comments and critics to the following email address : .


1.11. Translations

At the moment there are translations available for:

Translations to other languages are always welcome. If you translated this document, please let me know, so I can set a link here.


1.12. About the author

Luc (in english Luke) is 29 years old, playing around with computers since 20years. Currently he is working as Unix System Engineer for an IT-corporation located in Kloten (Zurich), Switzerland. Main-focus is developing all flavors of innovative Systems running on Linux (and other Un*xes) . Further, for all major Un*x platforms all the “impossible” tasks will end up on his desk (yes, its funny and he loves it!)


2. Prerequisites

2.1. General

  • flex 2.54

  • bison 1.28

  • autoconf 2.52

  • automake 1.4

  • libtool 1.4

  • yacc 91.7.30

  • freetype2-devel [1]

  • re2c [2]

To be continued

All major distributions should include this general prerequisites.


2.2. OpenSSL

2.2.1. What is OpenSSL

 

The OpenSSL Project is a collaborative effort to develop a robust, commercial-grade, full-featured, and Open Source toolkit implementing the Secure Sockets Layer (SSL v2/v3) and Transport Layer Security (TLS v1) protocols as well as a full-strength general purpose cryptography library. The project is managed by a worldwide community of volunteers that use the Internet to communicate, plan, and develop the OpenSSL toolkit and its related documentation.

OpenSSL is based on the excellent SSLeay library developed by Eric A. Young and Tim J. Hudson. The OpenSSL toolkit is licensed under an Apache-style license, which basically means that you are free to get and use it for commercial and non-commercial purposes subject to some simple license conditions.

From authors points of view, its the basic to build a secure Unix-Server with Opensource Software, its needed for all major products like mod_ssl, OpenSSH and lot of other stuff that provides encrypted Data-processing

 
--www.openssl.org 

OpenSSL provides the libraries and include-files needed be the products mentioned above and also provides a Application to build Server and client-Certificates.


2.2.3. Building and installing

cd /usr/local
tar -xvzf openssl-0.9.7.tar.gz
 
cd openssl-0.9.7
 
./config shared 
 
make
make test
make install

echo "/usr/local/ssl/lib" >> /etc/ld.so.conf
ldconfig

TipSelect your CPU to improve speed
 

By default the Makefile generates code for the i486 CPU. You can change this by editing the Makefile after running config shared. Search for -m486 and replace it i.e with -march=athlon


2.3. GNU Database System

2.3.1. What is gdbm

 

GNU dbm is a set of database routines that use extensible hashing. It works similar to the standard UNIX dbm routines.

 
--www.gnu.org/software/gdbm 

The GNU dbm is a very important application used by almost every distribution. So it is installed by default on all distributions I tested.

In all probability the needed header files which are mandatory to build Apache with mod_rewrite and PHP are not installed by default. Please consult your distributions CD/DVD and install the devel package (The version can vary):

rpm -i gdbm-devel-1.8.0-546

This procedure is verified for SuSE and Redhat. Please confirm for other RPM based systems like Mandrake. Debian will follow as soon as possible.

Users of Debian bases systems can install gdbm as follow:

apt-get install libgdbmg1-dev

2.3.2. Building and installing by yourself

In the unlikely case that your distribution does not contain gdbm here the instructions how to build it.

./configure 

make
make install

ldconfig

2.4. MySQL

2.4.1. What is MySQL

MySQL is a very fast, powerful and very nice to handle Database.

Especially for webapplications where most access is read and few write, MySQL is the first choice. The newest Version is also transaction-capable. If you plan a Webapplication, that writes a lot of Data into the DB, maybe PostgreSQL is better suited for your project see Section 6.2.4 for installation hints

You need the C-API from MySQL for compiling PHP if you wish MySQL-Support in PHP. It is also needed if you want to use mod_authmysql, See Section 4.3 for more information


2.4.3. Building and installing

cd /usr/local
tar -xvzf mysql-3.23.55.tar.gz 
cd mysql-3.23.55

./configure \
--prefix=/usr/local/mysql \
--enable-assembler \
--with-innodb \
--without-debug

make 
make install 

/usr/local/mysql/bin/mysql_install_db
echo /usr/local/mysql/lib/mysql >> /etc/ld.so.conf 
ldconfig

For security-improvement add a MySQL-user on your system e.g. »mysql«.

chown -R mysql /usr/local/mysql/var

You may wish to start MySQL automatically at boottime, copy /usr/local/mysql/share/mysql/mysql.server to /etc/init.d/ (or wherever your rc-script are located) and create the corresponding symbolic link in the runlevel directories.

cp /usr/local/mysql/share/mysql/mysql.server /etc/init.d/

ln -s /etc/init.d/mysql.server /etc/init.d/rc3.d/S20mysql
ln -s /etc/init.d/mysql.server /etc/init.d/rc3.d/K20mysql


2.4.4. Securing MySQL

This part is only optional, and describes how to bind the MySQL daemon to the localhost IP

I suggest to just bind MySQL to the loopback-interface 127.0.0.1. This makes sure nobody can connect to your MySQL-Daemon via the network. But of course it only makes sense if MySQL runs on the same box like the webserver.

edit /etc/init.d/mysql.server and edit line 107 as following:

Original line:

$bindir/safe_mysqld --datadir=$datadir --pid-file=$pid_file&

Changed line:

$bindir/safe_mysqld --datadir=$datadir --pid-file=$pid_file \
--bind-address=127.0.0.1& (1)

(1)
Here you can define to which interface MySQL should be bound

Alternatively you can completely disable the networking functionality of MySQL.

$bindir/safe_mysqld --datadir=$datadir --pid-file=$pid_file \
--skip-networking &

2.5. Building mm

2.5.1. What is mm

 

The MM library is a 2-layer abstraction library which simplifies the usage of shared memory between forked (and this way strongly related) processes under Unix platforms. On the first layer it hides all platform dependent implementation details (allocation and locking) when dealing with shared memory segments and on the second layer it provides a high-level malloc(3)-style API for a convenient and well known way to work with data-structures inside those shared memory segments.

 
--www.engelschall.com 

It is a common library that enables Unix programmers to simplify shm (Shared memory) accesses. It is used by many products, e.g. PHP and mod_ssl


2.5.3. Building and installing

cd /usr/local
 
tar -xvzf mm-1.2.2.tar.gz
 
cd mm-1.2.2
 
./configure
make
make test
make install

ldconfig

3. Getting, build and install Apache with its basic modules

3.1. Get and untar the Apache Source

3.1.1. What is Apache

 

The Apache Project is a collaborative software development effort aimed at creating a robust, commercial-grade, featureful, and freely-available source code implementation of an HTTP (Web) server. The project is jointly managed by a group of volunteers located around the world, using the Internet and the Web to communicate, plan, and develop the server and its related documentation. These volunteers are known as the Apache Group. In addition, hundreds of users have contributed ideas, code, and documentation to the project. This file is intended to briefly describe the history of the Apache Group and recognize the many contributors.

 
--www.apache.org 

It is simply the best Webserver-Software, it is very flexible to configure to match your needs, and it is E-X-T-R-E-M-E stable. I personally never experienced a crash in a productive (=non-experimental stuff) environment


3.1.2. Download the source

Origin-Site http://www.apache.org/dist/httpd/

cd /usr/local/

tar -xvzf apache_1.3.27.tar.gz


3.1.3. Patch for large-scale sites

If your webserver should answer very much requests at the same time, and your machine is strong enough to serve such an amount of requests, you can change the limit of maximum running processes

Download the patch from: http://www.delouw.ch/linux/apache-patch_HARD_SERVER_LIMIT.txt

--- httpd.h     Thu Mar 21 18:07:34 2002
+++ httpd.h-new Sun Apr  7 13:34:11 2002
@@ -320,7 +320,7 @@
 #elif defined(NETWARE)
 #define HARD_SERVER_LIMIT 2048
 #else
-#define HARD_SERVER_LIMIT 256
+#define HARD_SERVER_LIMIT 512
 #endif
 #endif

This patch does increase the maximum concurrent accessing clients to 512. Feel free to increase it further, if you hacked your kernel and edited your /etc/security/limits.conf

CautionAvoid running out of tasks
 

With wrong settings this could end as a »self-denial-of-service-attack« Be sure you have enough processes left for root)

Apply the patch using:

cd /usr/local/apache_1.3.27/src/include

patch -p0 < apache-patch_HARD_SERVER_LIMIT.txt

3.2. mod_ssl

3.2.1. What is mod_ssl

 

This module provides strong cryptography for the Apache 1.3 webserver via the Secure Sockets Layer (SSL v2/v3) and Transport Layer Security (TLS v1) protocols by the help of the Open Source SSL/TLS toolkit OpenSSL, which is based on SSLeay from Eric A. Young and Tim J. Hudson.

 
--www.modssl.org 

This module is needed to enable Apache for SSL-Requests (https). It applies a patch to the Apache source-code and extends its API (Application Programming Interface). The result is called EAPI (Extended Application Programming Interface).

CautionUse of compilerflags while compiling modules
 

Make sure any module for your Apache server is compiled with the compiler-flag -DEAPI, or your Webserver might crash or can not be started.

Almost all modules I know adds the -DEAPI flag by themself except mod_jserv and mod_jk


3.2.3. Applying the patch to the Apache source

cd /usr/local/

tar -xvzf mod_ssl-2.8.12-1.3.27.tar.gz
cd mod_ssl-2.8.12-1.3.27/

./configure --with-apache=../apache_1.3.27 

3.3. mod_perl

3.3.1. What is mod_perl

 

With mod_perl it is possible to write Apache modules entirely in Perl. In addition, the persistent interpreter embedded in the server avoids the overhead of starting an external interpreter and the penalty of Perl start-up time.

 
--perl.apache.org 

mod_perl is a kind of substitute for cgi-bin's. cgi's typically forks a new process for each request, and produces overhead. With mod_perl the perl-interpreter is loaded persistent in the Apache server and does not need to fork processes for each request.


3.3.3. Building and installing

cd /usr/local

tar -xvzf mod_perl-1.27.tar.gz

cd mod_perl-1.27

perl Makefile.PL \
EVERYTHING=1 \
APACHE_SRC=../apache_1.3.27/src \
USE_APACI=1 \
PREP_HTTPD=1 \
DO_HTTPD=1

make
make install

CautionMod_perl can not be compiled as DSO
 

Do not compile mod_perl as DSO (Dynamic Shared Object)! According to various sources, Apache will crash (I never tried).


3.4. Configure and build Apache

Now the two static modules mod_ssl and mod_perl are configured and the Apache Source has been patched, and we can proceed with building Apache.


3.4.1. Building and installing

EAPI_MM="/usr/local/mm-1.2.2" SSL_BASE="/usr/local/ssl" \
./configure \
--enable-module=unique_id \
--enable-module=rewrite \
--enable-module=speling \
--enable-module=expires \
--enable-module=info \
--enable-module=log_agent \
--enable-module=log_referer \
--enable-module=usertrack \
--enable-module=proxy \
--enable-module=userdir \
--enable-module=so \
--enable-shared=ssl \
--enable-module=ssl \
--activate-module=src/modules/perl/libperl.a \
--enable-module=perl

make
make install

3.4.2. Create self-signed SSL-certificate

cd /usr/local/ssl/bin

./openssl req -new > new.cert.csr
./openssl rsa -in privkey.pem -out new.cert.key
./openssl x509 -in new.cert.csr -out new.cert.cert \
-req -signkey new.cert.key -days 999

cp new.cert.key /usr/local/apache/conf/ssl.key/server.key
cp new.cert.cert /usr/local/apache/conf/ssl.crt/server.crt

TipCommon name
 

OpenSSL asks for different things. A common error is to enter a wrong "common name". This should be the FQHN (Fully Qualified HostName) of your Server, i.e www.foo.org


4. Additional modules

4.1. mod_dav

4.1.1. What is mod_dav

 

mod_dav is an Apache module to provide DAV capabilities (RFC 2518) for your Apache web server. It is an Open Source module, provided under an Apache-style license.

 
--www.webdav.org 

From the authors point of view:

DAV means: »Distributed authoring and Versioning«. It allows you to manage your Website similar to a filesystem. It is meant to replace ftp-uploads to your webserver.

DAV is supported by all major web development tools (newer versions) and is going to be a widely accepted standard for webpublishing.


4.1.3. Building and installing

cd /usr/local

tar -xvzf mod_dav-1.0.3-1.3.6.tar.gz
cd mod_dav-1.0.3-1.3.6

./configure --with-apxs=/usr/local/apache/bin/apxs

make
make install

TipConfusing filename
 

The filename mod_dav-1.0.3-1.3.6 suggests that it will only run with Apache 1.3.6 but it actually will run with all Apaches >= 1.3.6


4.2. auth_ldap

4.2.1. What is auth_ldap

 

auth_ldap is an LDAP authentication module for Apache, the world's most popular web server. auth_ldap has excellent performance, and supports Apache on both Unix and Windows NT. It also has support for LDAP over SSL, and a mode that lets Frontpage clients manage their web permissions while still using LDAP for authentication.

 
--www.rudedog.org 

From the authors point of view:

If you like to consolidate your login-facilities to a common user/passwd base, LDAP (Lightweight Directory Access Protocol) is the right way. LDAP is an open standard and widely supported.

Login-facilities for LDAP:

Unix-Logins for Linux, Solaris (others?) FTP-Logins (some ftp-daemons) http Basic Authentication Tarantella Authentication and Role-Management Samba Authentication (2.2.x should support this) LDAP is role based. That means, i.e. you can define a role »manager« assign a user as member and that user can login wherever a manager is allowed to login.


4.2.3. Building and installing

cd /usr/local

tar -xvzf auth_ldap-1.6.0.tar.gz

cd auth_ldap-1.6.0

./configure --with-apxs=/usr/local/apache/bin/apxs \
--with-sdk=openldap

make
make install

4.3. mod_auth_mysql

4.3.1. What is mod_auth_mysql

It is a http-Basic Authentication Module. It allows to maintain your user comfortable in a MySQL-Database


4.3.3. Building and installing

gunzip mod_auth_mysql.c.gz

/usr/local/apache/bin/apxs \
-c -I/usr/local/mysql/include \
-L/usr/local/mysql/lib/mysql \
-lmysqlclient -lm mod_auth_mysql.c

cp mod_auth_mysql.so /usr/local/apache/libexec/

Add this line in your httpd.conf:

LoadModule mysql_auth_module libexec/mod_auth_mysql.so

And where the other modules are added:

AddModule mod_auth_mysql.c

Take care that the path of MySQL libraries and includes are correct.

TipLibrary path
 

Be sure that /usr/local/mysql/lib/mysql is in /etc/ld.so.conf before compiling


4.3.4. Sample configuration

Example 1. /usr/local/apache/conf/httpd.conf

<location /manual/>
  AuthType Basic
  AuthUserfile /dev/null
  AuthName Testing
  AuthGroupFile /dev/null
  AuthMySQLHost localhost
  AuthMySQLCryptedPasswords Off
  AuthMySQLUser root
  AuthMySQLDB users
  AuthMySQLUserTable user_info
  <Limit GET POST>
    require valid-user
  </limit>
</location>

4.3.4.1. Script for creating the MySQL-Database

just type:

mysql < authmysql.sql

The File authmysql.sql contents:

Example 2. authmysql.sql

  create database http_users;
  connect http_users;

  CREATE TABLE user_info (
  user_name CHAR(30) NOT NULL,
  user_passwd CHAR(20) NOT NULL,
  user_group CHAR(10),
  PRIMARY KEY (user_name);

4.4. mod_dynvhost

4.4.1. What is mod_dynvhost

It is a module that allows to define new Virtual Host "on-the-fly". Just create a new Directory in your vhost-path, thats it. It is not need to restart your Webserver

It is a good solution for Mass-Virtual-hosting for ISP's


4.4.3. Building and installing

cd /usr/local

tar -xvzf mod_dynvhost.tar.gz

cd dynvhost/

/usr/local/apache/bin/apxs -i -a -c mod_dynvhost.c

TipCheck httpd.conf
 

Notice: Take a look at httpd.conf if mod_dynvhost.so is loaded at startup:

LoadModule dynvhost_module libexec/mod_dynvhost.so

4.4.4. Sample configuration

Example 3. /usr/local/apache/conf/httpd.conf

<DynamicVirtualHost /usr/local/apache/htdocs/vhosts/> 
  HomeDir / 
</DynamicVirtualHost>

Now create a Directory for each virtualhost in /usr/local/apache/htdocs/vhosts/

i.e.

/usr/local/apache/htdocs/vhosts/foo.bar.org

You don't need to restart your Webserver


4.5. mod_roaming

4.5.1. What is mod_roaming

 

With mod_roaming you can use your Apache webserver as a Netscape Roaming Access server. This allows you to store your Netscape Communicator 4.5 preferences, bookmarks, address books, cookies etc. on the server so that you can use (and update) the same settings from any Netscape Communicator 4.5 that can access the server.

 
--www.klomp.org/mod_roaming/ 

From the authors point of view:

Mod_roaming is indeed valuable. Unfortunately it does not work over proxy-connection. You can keep your Netscape 4.x bookmarks etc. synchronized on different machines. It is not supported by any other browsers, including Mozilla and Netscape 6.x.


4.5.3. Building and installing

cd /usr/local 

tar -xvzf mod_roaming-1.0.2.tar.gz

cd mod_roaming-1.0.2

/usr/local/apache/bin/apxs -i -a -c mod_roaming.c

TipCheck httpd.conf
 

Check httpd.conf if mod_roaming is loaded at startup:

LoadModule roaming_module libexec/mod_roaming.so

4.5.4. Sample configuration

Example 4. /usr/local/apache/conf/httpd.conf

RoamingAlias /roaming /usr/local/apache/roaming
<Directory /usr/local/apache/roaming>
  AuthUserFile /usr/local/apache/conf/roaming-htpasswd
  AuthType Basic
  AuthName "Roaming Access"
  <Limit GET PUT MOVE DELETE>
    require valid-user
  </Limit>
</Directory>

5. Compressed delivery

There are basically two modules available for output compression: mod_gzip and mod_gunzip. They are using different approaches to reach the same goal of bandwidth reduction.

mod_gunzip expects compressed file on the filesystem, and uncompress them if the browser cannot handle compressed data. The benefit is a low cpu-usage, because most browsers are capable to handle gzipped content. On the oder side, most of today's content is served dynamically i.e. PHP, and this content will be delivered uncompressed.

mod_gzip does not need compressed files on the system, all defined content will be compressed before delivery. The benefit is to have the dynamically generated content also compressed, the other side is a higher cpu-usage, because every request has to be compressed on-the-fly. Mod_gzip can handle already compressed data i.e. index.html.gz and send it as-is.

The conclusion: You carefully have to make a decision which of the two modules makes more sense for you. If you have to pay for every GB delivered and CPU-power does not matter, then mod_gzip is the choice for you. If response time matters (delay between request and delivery), and your bandwidth is cheap or unlimited, mod_gunzip matches your needs better.

A good page that helps you to make this decision is Martin Kiff's document about mod_gunzip http://www.innerjoin.org/apache-compression/howto.html


5.1. mod_gzip


5.1.2. Building and installing

To successfully compile mod_gzip you need to edit the Makefile and provide the correct path to apxs

make
make install

5.1.3. Sample configuration

Put the following in your /usr/local/apache/conf/httpd.conf:

Example 5. /usr/local/apache/conf/httpd.conf

mod_gzip_on                 Yes
mod_gzip_can_negotiate      Yes
mod_gzip_dechunk            Yes
mod_gzip_minimum_file_size  600
mod_gzip_maximum_file_size  0
mod_gzip_maximum_inmem_size 100000
mod_gzip_keep_workfiles     No
mod_gzip_temp_dir           /usr/local/apache/gzip
mod_gzip_item_include       file \.html$
mod_gzip_item_include       file \.txt$
mod_gzip_item_include       file \.jsp$
mod_gzip_item_include       file \.php$
mod_gzip_item_include       file \.pl$
mod_gzip_item_include       mime ^text/.*
mod_gzip_item_include       mime ^application/x-httpd-php
mod_gzip_item_include       mime ^httpd/unix-directory$
mod_gzip_item_include       handler ^perl-script$
mod_gzip_item_include       handler ^server-status$
mod_gzip_item_include       handler ^server-info$
mod_gzip_item_exclude       file \.css$
mod_gzip_item_exclude       file \.js$
mod_gzip_item_exclude       mime ^image/.*

You may whish to log the result of the compression to your accesslog. This can be done by changing the LogFormat directive in /usr/local/apache/conf/httpd.conf

LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\" mod_gzip: %{mod_gzip_compression_ratio}npct." combined


5.2. mod_gunzip


5.2.2. Building and installing

tar -xvzf mod_gunzip.tar.gz
cd mod_gunzip-2

/usr/local/apache/bin/apxs -i -a -c -lz mod_gunzip.c

5.2.3. Sample configuration

Put the following in your /usr/local/apache/conf/httpd.conf:

Example 6. /usr/local/apache/conf/httpd.conf

AddType text/html .htmz
AddHandler send-gunzipped .htmz

Now you can gzip your html files and rename them to i.e:

gzip index.html
mv index.html.gz index.htmz

Of course you have to change all links to htmz, i.e. <a href="page.htmz">Some page</a>


6. mod_php and its prerequisites

6.1. What is mod_php

 

PHP is a server-side, cross-platform, HTML embedded scripting language.

In the beginning it was just a simple guestbook-processor, and it was growing and growing Since Version 3 it is really powerful Webdevelopment-language

 
--www.php.net 

Since Version 4 PHP capable and robust enough for enterprise webapplications. It is powerful, supports almost all important databases natively, and other through ODBC (Open DataBase Connectivity). It a few times faster than ASP on Windows Systems on the same Hardware.

There are other extensions available like APC (Alternative PHP Cache), which speed up processing about 50-400% (depends on the php-code you wrote)


6.2. Prerequisites

Depending on your needs there are some software to install first. One already installed Software according this document is MySQL, because its needed by mod_auth_mysql.


6.2.1. IMAP client

6.2.1.1. What is IMAP client

IMAP means »Internet Mail Application Protocol« and is a substitute for the POP (Post Office Protocol) protocol. It allows to keep all Mails in different folders on the server, which (should) be backed up - Never again lose important email, because your local harddrive crashed


6.2.3. Building and installing

cd /usr/local

tar -xvfz imap.tar.Z

cd imap

make slx SSLTYPE=nopwd (1)

(1)
With the parameter SSLTYPE=unix you define if you need SSL support or not. Omitting means no SSL support.

TipFilename to download
 

imap.tar.Z is usually a symlink to the latest release, today its linked to imap-2001a.tar.Z


6.2.4. PostgreSQL

6.2.4.1. What is PostgreSQL

PostgreSQL is a very powerful and fast Database

Like MySQL wonderful for Webapplications. From my Point of view, not as comfortable to handle as MySQL. If your Webapplication performs mostly writes, or you need proofed transaction-capabilities, PostgreSQL is your friend


6.2.4.2. Download the source

Origin-Site: http://www.postgresql.org (Select a mirror close to you)


6.2.4.3. Building and installing
cd /usr/local

tar -xvzf postgresql-7.3.2.tar.gz

cd postgresql-7.3.2

./configure \
--with-perl \
--enable-odbc \
--with-unixodbc  \
--with-pam \
--with-openssl \


make
make install

echo /usr/local/pgsql/lib >> /etc/ld.so.conf

ldconfig

6.2.5. Sablotron

6.2.5.1. What is Sablotron
 

Sablotron is a fast, compact and portable XML toolkit implementing XSLT 1.0, DOM Level2 and XPath 1.0. Sablotron is an open project; other users and developers are encouraged to use it or to help us testing or improving it. The goal of this project is to create a lightweight, reliable and fast XML library processor conforming to the W3C specification, which is available for public and can be used as a base for multi-platform XML applications.

 
--http://www.gingerall.com/charlie/ga/xml/p_sab.xml 

6.2.5.3. Building and installing
tar -xvzf Sablot-0.97.tar.gz
cd Sablot-0.97

./configure
make
make install

ldconfig

6.2.6. pdflib

6.2.6.1. What is pdflib
 

PDFlib: A library for generating PDF on the fly PDFlib is the premier software component if you want to generate PDF on your server, convert text and graphics, or implement PDF output in your own products.

 
--www.pdflib.com 

From the authors point of view:

CautionThis is a commercial product
 

PDFLIB is a commercial Product. Read the license carefully to see if you need a commercial license or not


6.2.6.3. Building and installing
cd /usr/local/
tar -xvzf pdflib-4.0.3.tar.gz

cd pdflib-4.0.3

./configure --enable-shared-pdflib --enable-cxx

make
make install

ldconfig

6.2.7. gettext

6.2.7.1. What is gettext

gettext is a library for i18n (Internationalization, "I", 18 chars and "n") of software, and needed by php


6.2.7.2. Download the source

Origin-Site: ftp://ftp.gnu.org/gnu/gettext (select a mirror close to you)


6.2.7.3. Building and installing
cd /usr/local

tar -xvzf gettext-0.11.2.tar.gz

cd gettext-0.11.2

./configure

make
make check
make install

ldconfig

6.2.8. zlib

6.2.8.1. What is zlib

zlib is a lossless data-compression library for use on virtually any computer hardware and operating system


6.2.8.3. Building and installing
cd /usr/local

tar -xvzf zlib-1.1.4.tar.gz

cd zlib-1.1.4/

./configure

make
make test
make install

ldconfig

6.3. Building and installing PHP4

cd /usr/local

tar -xvzf php-4.3.0.tar.gz

cd php-4.3.0

export LDFLAGS=-lstdc++

./configure \
--with-apxs=/usr/local/apache/bin/apxs \
--with-mysql=/usr/local/mysql \
--with-pgsql=/usr/local/pgsql \
--enable-track-vars \
--with-openssl=/usr/local/ssl \
--with-imap=/usr/local/imap \
--with-gd --with-ldap \
--enable-ftp \
--enable-sysvsem \
--enable-sysvshm \
--enable-sockets \
--with-pdflib=/usr/local \
--with-gettext \
--with-mm=/usr/local/mm-1.1.3 \
--with-jpeg-dir=/usr/lib \
--with-zlib-dir=/usr/local \
--enable-wddx \
--with-mcrypt \
--with-mhash \
--with-mcal=/usr \
--enable-exif \
--enable-xslt \
--with-xslt-sablot=/usr/local \
--with-dom \
--with-dom-xslt \

Edit the Makefile and add -lstdc++ to the variable EXTRA_LIBS. This is currently only needed, when using Sablotron version 0.9.7

make
make install

After installing your httpd.conf is modified by axps. It should now look as follows:

<IfDefine SSL>
LoadModule ssl_module         libexec/libssl.so
LoadModule php4_module        libexec/libphp4.so
</IfDefine>

If you compiled Apache with mod_ssl then the php-module will only be loaded when staring Apache with ssl (apachectl startssl). If you will start Apache without ssl support (but compiled like described in this document) you need to change this:

<IfDefine SSL>
LoadModule ssl_module         libexec/libssl.so
</IfDefine>
LoadModule php4_module        libexec/libphp4.so

Copy the sample php.ini-dist to /usr/local/lib/php.ini

cp /usr/local/php-4.3.0/php.ini-dist /usr/local/lib/php.ini

uncomment (remove the # at begin of line) the following lines in /usr/local/apache/conf/httpd.conf

Apache 1.3.27 default httpd.conf does lack of this entries. You have to add them instead of uncommenting

AddType application/x-httpd-php .php
AddType application/x-httpd-php .phtml
AddType application/x-httpd-php .php3

# If you want to display PHP source 

AddType application/x-httpd-php-source .phps (1)

(1)
This line is only needed if you like to display sourcecodes in the browser. The fileextension of such files should be phps.

Tipregister_globals
 

Since PHP Version 4.2.1, »register_globals« are set OFF. This can bring you in problems running PHP-Code not using the $HTTP_GET_VARS methods. To enable register_globals edit the following line in your /usr/local/lib/php.ini:

register_globals = On

Please be sure, if you write new software, to use the new methods. Support of old methods will be dropped sooner or later

Restart Apache by issuing the following command:

/usr/local/apache/bin/apachectl restart

7. PHP extensions

There are many different extensions available for php, which can be added in your php.ini


7.1. APC (Alternative PHP-cache)

7.1.1. What is APC

 

APC is the Alternative PHP Cache. It was conceived of to provide a free, open, and robust framework for compiling and caching php scripts. APC was conceived of to provide a way of boosting the performance of PHP on heavily loaded sites by providing a way for scripts to be cached in a compiled state, so that the overhead of parsing and compiling can be almost completely eliminated. There are commercial products which provide this functionality, but they are neither open-source nor free. Our goal was to level the playing field by providing an implementation that allows greater flexibility and is universally accessible. We also wanted the cache to provide visibility into it's own workings and those of PHP, so time was invested in providing internal diagnostic tools which allow for cache diagnostics and maintenance. Thus arrived APC. Since we were committed to developing a product which can easily grow with new version of PHP, we implemented it as a zend extension, allowing it to either be compiled into PHP or added post facto as a drop in module. As with PHP, it is available completely free for commercial and non-commercial use, under the same terms as PHP itself. APC has been tested under PHP 4.0.3, 4.0.3pl1 and 4.0.4. It currently compiles under Linux and FreeBSD. Patches for ports to other OSs/ PHP versions are welcome.

 
--www.apc.communityconnect.com/ 

The author made some performance-Tests with apc and it was real surprise. A PHP-Webpage with MySQL-queries in a loop (total 10 queries) was more than 50% faster

Contra APC: If you have other users on the system coding php they maybe are not comfortable with APC, because the changes are all ignored unless you reset the cache or restart Apache. The other way, namely that APC checks the php-script for a newer version before every run costs speed.


7.1.3. Building and installing

cd /usr/local

tar -xvzf apc-cvs.tar.gz

cd apc

./configure --enable-apc --with-php-config=/usr/local/bin/php-config

make
make install

cp modules/php_apc.so /usr/local/lib/php/extensions

echo 'zend_extension="/usr/local/lib/php/extensions/php_apc.so"' \
>> /usr/local/lib/php.ini
echo “apc.mode = shm” >> \
apc.mode = shm

Restart your Apache-Webserver. Try it out, create a php-file with the following content:

Example 7. apctest.php

<?php
apcinfo();
?>

7.2. Zend-Optimizer (Do _NOT_ combine with APC-Cache!)

7.2.1. What is Zend-optimizer

 

The Zend Optimizer goes over the intermediate code generated by the standard Zend run-time compiler located in the Zend Engine, and then optimizes it for faster execution.

 
--www.zend.com 

Zend-Optimizer is a freeware closed source product. On the same testcode used for the APC-test, there was speed-decrease of about 5% compared to PHP without APC.

You have to make your own test, to see, if you have some improvements with your own code. Be sure not to NOT use Zend Optimizer together with APC, or your whole setup will not work.


7.2.2. Download the binary

Origin-Site: https://www.zend.com/store/free_download.php?pid=13

TipRegister at zend.com
 

You have to register yourself at zend.com to get access to the download-page


7.2.3. Installing

There is noting to build, this product is closed-source and so only available as binary for different platforms. The filename varies according your platform, the sample is for Linux on IA32.

cd /usr/local

tar -xvzf ZendOptimizer-2.1.0-Linux_glibc21-i386.tar.gz
	 
cd ZendOptimizer-2.1.0-Linux_glibc21-i386

./install.sh

The install script is self-explanatory, if you compiled Apache and PHP like described in this document, you can just press ENTER on all questions about the pathnames.


8. Jakarta Tomcat

8.1. What is Tomcat

 

Tomcat is the servlet container that is used in the official Reference Implementation for the Java Servlet and JavaServer Pages technologies. The Java Servlet and JavaServer Pages specifications are developed by Sun under the Java Community Process.

From the authors point of view:

 
--jakarta.apache.org 

Tomcat is the successor of jserv which is no longer developed. Tomcat supports the latest jsp and servlet-APIs defined by sun. Unfortunately Tomcat is very difficult to build from source, because it is using its own building-system called "ant". There is also a very long list of prerequisites if you want to build from source. See http://jakarta.apache.org/tomcat/tomcat-4.0-doc/BUILDING.txt for more details - Good luck, and give some feedback to the author.

In the meantime the HOWTO is providing some basic support for Tomcat installed from binaries.

The Author is searching for some volunteers who tries to build Tomcat from source and tells what steps are required


8.2. Prerequisites


8.2.2. Download the binaries

Go to http://java.sun.com/j2se/1.3/ [3],choose your platform and follow the steps on the site.


8.2.3. Installing the binaries

Execute the binary:

chmod +x j2sdk-1_3_1_02-linux-i386.bin

./2sdk-1_3_1_02-linux-i386.bin

After accepting the license, unpack the stuff and move the resulting directory to /usr/lib and set an appropriate symbolic link


8.3. Download the binaries

Origin-Site: http://jakarta.apache.org/builds/jakarta-tomcat-4.0/release/v4.1.18/src/jakarta-tomcat-4.1.18-src.tar.gz


8.3.1. Installing the binaries

cd /usr/local

tar -xvzf jakarta-tomcat-4.1.8.tar.gz

cd jakarta-tomcat-4.1.8

cd bin

rm *.bat

echo export JAVA_HOME=/usr/lib/java/ >> /etc/profile
. /etc/profile

To enable the Tomcat manager, you need to modify /usr/local/jakarta-tomcat-4.1.8/conf/tomcat-users.xml add a user »admin« or with the role »manager«. The result should look like this:

<?xml version='1.0' encoding='utf-8'?>
<tomcat-users>
  <role rolename="manager"/>
  <role rolename="tomcat"/>
  <role rolename="role1"/>
  <user username="admin" password="secret" roles="manager"/>
  <user username="tomcat" password="tomcat" roles="tomcat"/>
  <user username="role1" password="tomcat" roles="role1"/>
  <user username="both" password="tomcat" roles="tomcat,role1"/>
</tomcat-users>

Now you should be able to startup tomcat:

/usr/local/apache/jakarta-tomcat-4.1.8/bin/startup.sh

You should now be able to connect to: http://localhost:8080/index.jsp


8.4. mod_jk

8.4.1. Download the source

If you like to have a native interface into your Apache Webserver, you need to build mod_jk with must be downloaded separately here: http://jakarta.apache.org/builds/jakarta-tomcat-4.0/release/v4.1.18/src/jakarta-tomcat-connectors-4.1.18-src.tar.gz.


8.4.2. Building and installing

tar -xvzf jakarta-tomcat-connectors-4.1.18-src.tar.gz

cd jakarta-tomcat-connectors-4.1.18-src/jk/native

./buildconf
./configure --with-apxs=/usr/local/apache/bin/apxs

make
make install

8.4.3. Customizing

Now follows the annoying part, the customizing of the config files. First edit /usr/local/jakarta-tomcat-connectors-4.1.18-src/jk/conf/workers.properties, and copy the file to /usr/local/apache/conf

I made a sample workers.properties that works with the example JSPs and servlets that comes with the Tomcat distribution. It is based on the sample workers.properties from Tomcat

Example 8. workers.properties

workers.tomcat_home=/usr/local/jakarta-tomcat-4.1.18

# workers.java_home should point to your Java installation. Normally
# you should have a bin and lib directories beneath it.
#
workers.java_home=/usr/lib/java2

# You should configure your environment slash... ps=\ on NT and / on UNIX
# and maybe something different elsewhere.
#
ps=/

# The workers that your plugins should create and work with
#
worker.list=worker1

#------ DEFAULT ajp13 WORKER DEFINITION ------------------------------
#---------------------------------------------------------------------
# Defining a worker named ajp13 and of type ajp13
# Note that the name and the type do not have to match.
#
worker.worker1.port=8009
worker.worker1.host=localhost
worker.worker1.type=ajp13

#------ CLASSPATH DEFINITION -----------------------------------------
#---------------------------------------------------------------------
# Additional class path components.
#
worker.inprocess.class_path=$(workers.tomcat_home)$(ps)lib$(ps)tomcat.jar

# The JVM that we are about to use
#
# Unix - Sun VM or blackdown
worker.inprocess.jvm_lib=$(workers.java_home)$(ps)jre$(ps)lib$(ps)i386$(ps)classic$(ps)libjvm.so

# Setting the place for the stdout and stderr of tomcat
#
worker.inprocess.stdout=$(workers.tomcat_home)$(ps)logs$(ps)inprocess.stdout
worker.inprocess.stderr=$(workers.tomcat_home)$(ps)logs$(ps)inprocess.stderr

Next, you need to configure your apache config file httpd.conf. The following example matches the examples provided by Tomcat.

LoadModule jk_module libexec/mod_jk.so
AddModule mod_jk.c

JkWorkersFile /usr/local/apache/conf/workers.properties
JkLogFile /var/log/httpd/mod_jk.log
JkLogLevel info
JkLogStampFormat "[%a %b %d %H:%M:%S %Y] "
JkOptions +ForwardKeySize +ForwardURICompat -ForwardDirectories
JkRequestLogFormat "%w %V %T"
JkMount /examples/servlet/* worker1
JkMount /examples/*.jsp worker1 

After restarting Apache, you should now be able to connect to your JSP's via Apache. I.e: http://localhost/examples/jsp/num/numguess.jsp

For the further steps like installing your servlets and jsp-files, you are responsible by yourself...

TipEnvironment Variables
 

If Tomcat fails to start and/or your servlets could not be started the most common error made is having not all needed classes in the CLASSPATH variable.


9. Further Information

Here are some other resources available on the internet


9.1. News groups

Some of the most interesting news groups are:

Also check out your country newsgroups e.g ch.comp.os.linux

Most newsgroups have their own FAQ that are designed to answer most of your questions, as the name Frequently Asked Questions indicate. Fresh versions should be posted regularly to the relevant newsgroups. If you cannot find it in your news spool you could go directly to the FAQ main archive FTP site. The WWW versions can be browsed at the FAQ main archive WWW site.


9.2. Mailing Lists


9.2.1.

Send an empty email to

Before writing to the list, check out the archive: http://marc.theaimsgroup.com/?l=apache-httpd-users


9.2.2.

Send an mail to with the content (not subject):

   subscribe modperl

Before writing to the list, check out the archive: http://outside.organic.com/mail-archives/modperl/


9.2.3.

Send an mail to with the content (not subject):

   subscribe openssl-users

Before writing to the list, check out the archive: http://www.mail-archive.com/openssl-users@openssl.org/


9.2.4.

Send an mail to with the content (not subject):

   subscribe modssl-users

Before writing to the list, check out the archive: http://www.mail-archive.com/modssl-users@modssl.org/


9.2.5.

Send an empty mail to

Before writing to the list, check out the archive: http://lists.mysql.com/cgi-ez/ezmlm-cgi/


9.2.6.

Fill out the subscription form at http://developer.postgresql.org/mailsub.php

Before writing to the list, check out the archive: http://archives.postgresql.org/pgsql-general/


9.2.7.

Fill out the subscription form at http://www.php.net/mailing-lists.php

There are several php related mailinglist to subscribe, some of them are also available on php.net's newsserver

Before writing to the list, check out the archive that are linked also on the subscription-page


9.2.8.

Send an mail to with the content (not subject):

   subscribe


9.3. HOWTO

These are intended as the primary starting points to get the background information. They also show you how to solve a specific problem. Some relevant HOWTOs are

Apache-Overview-HOWTO , Apache-WebDAV-LDAP-HOWTO , LDAP-HOWTO , LDAP-Implementation-HOWTO and the PHP-HOWTO

The main site for these is the LDP archive


9.4. Local Resources

Usually distributions install some documentation on your system. Usually they are located in /usr/share/doc/packages or /usr/local/share/doc

The software products mentioned here provide a lot of documentation in their source-directories. Apache does install its documentation in the default DocumentRoot /usr/local/apache/htdocs/manual


9.5. Web Sites

There are a large number of informative web sites available. By their very nature they change quickly, so do not be surprised if these links become outdated very fast.

A good starting point is of course the Linux Documentation Project home page, a central information repository for documentation, project pages and much more.

To get more information about the Software mentioned in this document, then the following sites are good starting points.

Please let me know if you have any other leads that can be of interest.


10. Questions and Answers

1. FAQ
10.1.1. Is there such a HOWTO for Apache 2.0?
10.1.2. Why you don't add a description howto compile and setup mod_xyz?
10.1.3. If my clients are connecting to https://myserver.org an errormessage similar to this appears "Certificate not valid"
10.1.4. When I request a php file, the browser want to download it. Whats wrong?
10.1.5. Does this HOWTO also work on other platforms?

1. FAQ

10.1.1. Is there such a HOWTO for Apache 2.0?

Not yet. The reason is that PHP 4.2.1 supports the Apache 2.0 API only experimentally and the speed of PHP is very poor with Apache 2.0. As the new Apache brings lots of new features and massive speed improvements, I will write such a HOWTO as soon as the PHP support is stable and more performant. I'm collecting now Ideas and wishes from users what they like to see in a Apache 2.0 HOWTO. Feel free to write an email to

10.1.2. Why you don't add a description howto compile and setup mod_xyz?

Because nobody requested it yet and I either did not know about a mod_xyz, or I did not found it useful. Feel free to write me some suggestions what to add to the HOWTO. If there is more than one request, and it makes sense, it will maybe added in further releases.

10.1.3. If my clients are connecting to https://myserver.org an errormessage similar to this appears "Certificate not valid"

A: The certificate produced like described in this HOWTO is just a self-signed certificate. This means the CA (Certification Authority) is you. Your CA is not recognized as a valid CA by your users browser. You can either install the certificate on your users machines (Makes sense in small Intranet environments) or buy a certificate from a CA that is recognized by all major browsers. An example of such a CA is Verisign http://www.verisign.com. Such a certificate cost approx. 300 USD a year, depending on the strength of the key (56 or 128 Bits)

10.1.4. When I request a php file, the browser want to download it. Whats wrong?

You forgot to tell Apache what to do with the php files. So the php files are not processed by the php engine. To do so, add the application type like described in Section 6.3

10.1.5. Does this HOWTO also work on other platforms?

Not sure, Solaris should work, AIX and HP-UX do not. I did not got the time to try FreeBSD yet. My goal is to provide a version of the HOWTO for all major Un*x platforms.

Notes

[1]

This RPM contains the header files needed for php

[2]

Only needed if PHP is being built from the CVS tree

[3]

There is also version 1.4.1 of Java available, but Tomcat seems not to run with that version of Java.