getty monitors serial lines, waiting for a connection. It then configures the serial link, sends the contents of /etc/issue, and asks the person connecting for their login name. getty then starts login and login asks the person for their password. If the user does nothing, getty or login hang up and getty goes back to waiting.
The getty command has been re-implemented numerous times. There is a wide selection of getty clones, each with slight differences in behavior and syntax. We will describe the traditional getty, and then some popular alternatives.
One of the jobs of a getty is to
TERM environment variable to indicate the
make and model of the terminal which is connecting. In this
HOWTO we set the terminal to the commonly
VT100. If you occassionally
connect using a different terminal emulation then you can
interactively change your choice of terminal by setting
TERM to the appropiate terminal listed in
Figure 6-1. Interactively altering the connecting terminal's make and model
bash$ TERM=kermit bash$ tset -r
A getty is also responsible for
setting the time zone when a permanently-connected remote terminal
is located beyond the machine's default time zone. The
getty overrides the default timezone by
TZ environment variable. As with the
TERM environment variable, a user connecting from a
modem can interactively override the default time zone.
Figure 6-2. Interactively altering the connecting terminal's time zone
bash$ TZ=Australia/Adelaide bash$ export TZ
If you do not know your time zone name, run the
tzselect utility to generate the appropiate
But first, let's see how getty gets started in the first place.